orthodontic

Straight Type Serrated Type Vertical Type

Feature and Advantage 1. The most excellent property ( Elasticity, Durability, Dynamic stability) among competitors who have been supplied into the domestic market. 2. Accurate and detailed forming. 3. Orthodontic treatment with high transparency. Model Size Thickness(Inch) pcs OPFS-020 Ø125mm 0.020 40 OPFS-025 Ø125mm 0.025 30 OPFS-030 Ø125mm 0.030 30 OPFS-040 Ø125mm 0.040 20 OPFS-060 Ø125mm 0.060 15

Bracket Positioning Gauge •The different thickness of gauge makes the user easily measure the posterior and anterior teeth with a wide scope of measurement from 2.0 to 5.0mm •The user can measure and mark the point of the bracket on the patient’s teeth or mockup Bracket Positioning Height Gauge • It is possible to measure and mark the attaching position precisely and easily with not being interfered by side tooth during bracket bonding. OGBH018 •Use bracket 018 only OGBH022 •Use bracket 022 only

OPSP01 Separating Plier 3ORWBP1 Wire Band Pusher Ligature Tucker Instrument (Wire Bending Instruments ) Use to bend a wire or hang a elastin ring on the Bracket

OPBI01 •Hard steel •Useful to push or hold a small-sized crimpable hook as it has V-notch on the beak. OPBI02 •Straight type •Hard steel •Used to remove brackets. •For the anterior OPBI03 •Curved type •Hard steel •Used to remove brackets. •For the posterior

Bird Beak Plier Used to bend a round wire Kims Plier Used to bend a wire, there is a cutter in the center of plier Tweed Loop Forming Used to bend a wire to the loop shaped Young's Plier Used to bend round wire Three Jaw Plier For manufacturing and adjusting clasp Tweed arch Bending Plier To make offset to rectangular wire or bend 90 degree Cinch Back Plier Use to fold Ni-Ti wire

OPPC01 Utility Plier (WEINGART) •Multiple used plier. Used to put wire in or take wire out. OPLF01 Ligature forceps (Mathieu) •Used to tie wire to bracket with ligature wire •Length : 140mm OPLM01 Ligature Forming Plier •Used to make ligature wire from slender wire •Length : 130mm

OPPC01 Pin Cutter Wire cutter (Soft) •To cut ligature wire. Do not cut thick wire as knife is sharp and thin. •Length : 130mm OPPC02 Pin Cutter •Wire cutter (Hard) •To cut thick wire Max. 0.7mm thickness. •Length : 130mm OPDE01 Distal End Cutter •Used to cut the end of a wire •Useful for cutting a thick wire •To hold wire cut in order not to drop in the mouth.

BOS OPK Internal Diameter 204 X 174 X 34h(mm) No. Product Name Code 1 Pin Cutter OPPC01 2 Distal End Cutter OPDE01 3 Utility Plier OPUP01 4 Cinch Back Plier OPCB01 5 Tweed Arch Bending Pliers OPWB06 6 Omega Loop Forming Plier OPWB07 7 Hollow Chop Plier OPWB08 8 Three Jaw Plier OPWB09 9 Nance Loop Plier OPWB10 10 Hemostat HTM130 11 Hemostat HTM130C 12 Ligature Tucker ORWB1 13 Tweezer ORT160 14 Instrument Cassette (blue silicone rails) EFCCN3 BOS-SIK •Exterior dimensions 204 x 174 x 34H(mm) No. Product Name Code ETC 1 Tying and holding Plier OPUP01 Utility Plier 2 Periosteal Elevator EP9 3 Periosteal Elevator EP9H 4 Tweezer PCU155 5 Scalpel Handle SHS 6 Scalpel Handle SHC 7 Ex-Probe XP23-12 8 Mirror MHS- DMSS4 9 Needle Holder NH160 10 Hemostat HTM130C 11 Scissors SCD170 12 Suction Tip SN3SUS 13 Instrument Cassette EFCCN3 purple silicone rails

Use & purpose of the product 1) Analysis of the impression model 2) Measure the occlusion of right & left side 3) Check the periodical orthodontic status •Explanation for each part a. For fixing a maxillary model. b. For fixing a mandibular model c. For preventing from the crash of the impression models & being a role as central support. d. Use to fix an impression model (project screw in the round) •Explanation for each parts 1) Attach impression models on (a) & (b) and check orthodontic treatment status & Bite downing @ using an adjustable screw (rounded attachment in the backside) 2) Possible to check the specific area (side) not the whole impression. 3) Make a treatment plan & check the orthodontic status simply not using an orthodontic articulator.