implant

•Specially-designed blades make excellent cutting power in verticality and horizontality. •Useful for multiple implants procedures. Specially used for relocation and redirection. •Effective for thick cortical bone cutting. •Effective for the site preparation of socket for an immediate implant. LLS21 2.1mm Diameter LLS26 2.6mm Diameter LLL21 2.1mm Diameter As it is long enough, it is very useful when a drill cannot access to the aiming position easily, due to the proximal teeth. LLL26 2.6mm Diameter As it is long enough, it is very useful when a drill cannot access to the aiming position easily, due to the proximal teeth.

Implant Depth Gauge DG1 •Used for checking the depth of the socket. •Can also be used for checking if the sinus membrane is perforated. •Gradation scale by 24mm with 3mm interval. Caliper LPC90 Caliper, Castroviejo •Castroviejo 30 Angled •Length 90mm the scope of measurement is 0~40mm

1. Easy to operate with supporting bar on the handle 2. Offset design for easy access in posterior 3. Gradation mark to measure the depth 4. Use a mallet if necessary BOC22 2.2mm BOC28 2.8mm BOC35 3.5mm BOC35R 3.5mm

•Used for expanding bone width in case of narrow alveolar bone. •Used for getting stable osseous tissue by compressing bone toward lateral when it is difficult to get Initial fixation due to low alveolar bone density. Ratchet Wrench: Used for tightening or loosening the expander. Engine Adapter: For using the expander with an engine. Point Drill ø1.3: Used for making a position where a fixture is to be placed. Length Extension: Used for extending the length of the expander. Hand Driver: Used for tightening or loosening the expander by finger instead of a ratchet wrench. Expander: Apical Diameter 1) 1.0mm 2.3mm 2) 1.4mm 2.7mm 3) 1.8mm 3.1mm 4) 2.2mm 3.5mm 5) 3.0mm 4.3mm 6) 3.8mm 3.8mm

•How to choose the final size of an expander? 1) Normal bone density : choose the same size as the fixture size. 2) Poor bone density : choose two step smaller size than the size of the fixture. Length Extension: Used for extending the length of the expander. Drill ø1.8 : Used for making a position where a fixture is to be placed. Hand Driver : Used for tightening or loosening the expander by finger instead of a handpiece. Ratchet Adapter: Connect an expander with a ratchet wrench Expander: Apical Diameter 1) 1.0mm 2.3mm 2) 1.4mm 2.7mm 3) 1.8mm 3.1mm 4) 2.2mm 3.5mm 5) 3.0mm 4.3mm 6) 3.8mm 3.8mm

Safe & excellent surgical procedure Patent Application •The shield cover with a 360 – degree revolution can approach in the oral cavity freely •The shield cover rotates to fit on the surface of the bone. It enables you to do the safe surgical procedure. •The hole on the shield cover can make a dentist to observe the surgical area easily. •Holes for lessening bone heating. •Saw thickness : 0.35mm including diamond coating layer. •No shaking and superior cutting power. •Possible to change direction gradually during bone cutting. •Automatic fixation for 0.5~2.5mm. •The shank fixation distance of a handpiece is different according to the brand •Special materials are used. - Excellent corrosion resistance and thermal resistance. - Low noise and improved rotatory power. **It can be combined with various handpieces such as KaVo, W&H, NSK, etc.**

Micro saw is a rotary cutting instrument for removing unnecessary bone torus or extremely thin ridge crest. Also it can be used for ridge split or block bone surgery. Contra Angle Use a contra angle handpiece for cutting bone in widthwise direction. >MICSA08 8mmDia. >MICSA10 10mmDia >MICSA13 13mmDia >MICSA15 15mmDia Straight Angle Use a straight handpiece for cutting bone in lengthwise direction in supplement for wider expanding. >MICSS08 8mmDia >MICSS10 10mmDia >MICSS13 13mmDia >MICSS15 15mmDia Advantages compared to competitors •Holes for lessening bone heating. •Saw thickness : 0.35mm including diamond coating layer. •No shaking and superior cutting power. •The vibration is minimized during bone cutting because of the diamond coating surface. •Possible to change direction gradually during bone cutting.

Trephine Bur •3.0/2.0mm trephine bur (THB30) can be used as an initial drill harvesting bone. •Make a path with reverse rotation and use a normal rotation at 800-1,200rpm •Used for the harvesting of mandibular bone. •Choose a proper size of trephine bur for failed fixture removing. For Bone Harvesting Product Code Internal Diameter External Diameter THB30 2mm 3mm THB40 3mm 4mm THB50 4mm 5mm THB60 5mm 6mm THB70 6mm 7mm THB80 7mm 8mm THB90 8mm 9mm To Remove Implant Product Code Internal Diameter External Diameter THR50 4mm 5mm THR60 5mm 6mm

A Concave Osteotome is used for the sinus elevation surgery. It can be used when the alveolar bone is very thin up to 1~2mm. The floor of the sinus is then lifted by tapping the sinus floor with the use of Osteotomes. BOCV20F 2.0mm BOCV28F 2.8mm BOCV33F 3.3mm BOCV36F 3.6mm BOCV43F 4.3mm BOCV50F 5.5mm

A convex Osteotome is used for the stable initial fixation of an implant through condensing alveolar bone laterally. It has a stopper for safe Osteotome technique. BOVX28F 2.8mm BOVX33F 3.3mm BOVX38F 3.8mm BOVX43F 4.3mm BOVX50F 5.0mm

Bone Scraper BSF •Sterilized product. Single-use. •Size 148 x 17 x 16H(mm) •If the blade becomes dull, rotate the blade with any 1.2mm hex driver to expose a new sharp edge. •5 pcs **The bone scraper comes packed as sterile products. It is very convenient to use.** Block Bone Clamp RCA197 •Anterior •Used for holding block bone •The length is 197mm RCP200 •Posterior •Used for holding block bone •The length is 200mm •Drilling available through the slot of the beak

Bone Collect Chisel STSBC-1 •Used for collecting osseous coagulum, Back-action Bone Collector ST1 •Used for collecting bone particles cut off while drilling. •To take osseous coagulum inhaled by suction using a filter. •Length 235mm •The filter is single-use. ST1-F Bone Collector Filter •Disposable Hexa Wrench 5mm IDH5-15N 15N Toque Wrench •Alert not to give excess power as it is bent if power is over 15N IDH7-15N 7mm 15N Toque Wrench •Alert not to give excess power as it is bent if power is over 15N